Diff Breather Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 30, 2006
Threads
120
Messages
1,044
Location
Calgary Alberta Canada
I am about to extend my Diff breathers. It seems fairly straight forward, but I am not sure about the AUTO/TANSFER box extension. in George's write http://george4wd.taskled.com/breather.html up it looks like the auto/transfer box terminates in the auto tranny dip stick.

My question is did he remove the breather hose from the dip stick, then use a T joint to connect the hose, dip stick, then run the extend line to the last breather hose connection??

I can't really tell, and I am a :banana: type of guy. Really I know it is probably a stupid question, but I don't want to be the guy who screwed up this easy little process.

Thanks for the help,

:confused:
 
I did mine about a year ago, and I don't recall needing to use any sort of T-bracket with the dip stick. I did however, run three seperate hoses, one each for front, rear, and t-case to an air filter in the engine compartment. I'm a 1/2:banana: kinda guy, and a perfectionist, but it was pretty straightforward. Just make sure you have everything on hand, and it'll go alot quicker. I've seen the 4Runner guys run there rear hose up along the fuel filler hose instead of bring it all the way under the truck, so that might make it a little easier than using p-clamps.
 
Back
Top Bottom