Did someone say new radius arms?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

CruiserDave

CruiserDave

10 Year 15 Year
Joined
Aug 5, 2009
Threads
30
Messages
366
Location
NC
Just picked up these Superpro arms on clearance for 630 shipped. Not Delta arms but better than bushings. Now if Icon will hurry up and ship my lift I can get started on the refresh of the suspension. Up above the radius arms are adjustable upper and lower rear control arms (from Malaysia), Delta panhard lift bracket and Ironman drop boxes. Not sure if I'll need the drop boxes now but I know the Superpro arms don't correct as much as most Delta arms so I'll see once everything is together.

20240521_163357.webp
 
CruiserDave said:
Just picked up these Superpro arms on clearance for 630 shipped. Not Delta arms but better than bushings. Now if Icon will hurry up and ship my lift I can get started on the refresh of the suspension. Up above the radius arms are adjustable upper and lower rear control arms (from Malaysia), Delta panhard lift bracket and Ironman drop boxes. Not sure if I'll need the drop boxes now but I know the Superpro arms don't correct as much as most Delta arms so I'll see once everything is together.

View attachment 3637278
Click to expand...
How much lift?
 
Icon lift is around 3" unloaded. But I have front and rear bumpers, winch and sliders. I'll have to see what the Icon lift nets when it arrives and is installed.
 
CruiserDave said:
Icon lift is around 3" unloaded. But I have front and rear bumpers, winch and sliders. I'll have to see what the Icon lift nets when it arrives and is installed.
Click to expand...
I’m looking at a 2-3 inch lift in the future..

Did you piece this together or was it an actual kit? Not entirely sure by your first post..

Looking forward to seeing your progress.
 
Pieced it together over time. Sorry for the confusion.
 
My old Icon lift net about 2" of lift with bumpers, sliders., tools, about 6500 lbs. That was with leveling spacers installed. I eventually upgraded to Dobinson IMS and Slinky springs and never looked back. Now i have a bout 3.5" of lift and it is just about perfect.
 
I tried Superpro to sell me just the blue bushings for those control arms. They won't sell them separately. I then asked for replacements & they said there is no purchase on file.
What gives?
Never heard of that from a manufacturer.
I told them they would sell thousands if sold separately. There is a huge need for good control arm bushing.
They wouldn't do it....
 
Are you talking about the bushing on the frame side or axle?
 
Marco Lau said:
My old Icon lift net about 2" of lift with bumpers, sliders., tools, about 6500 lbs. That was with leveling spacers installed. I eventually upgraded to Dobinson IMS and Slinky springs and never looked back. Now i have a bout 3.5" of lift and it is just about perfect.
Click to expand...
I like how soft and flexy the stock lx springs are, I would like to keep that but with 2- 3in more height. Sorry for thread bombing but I do have my own build thread if you want to talk about it there..
 
Talk away I don't mind. I posted this to start conversation.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom