diamondplate 1/4 panels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 17, 2003
Threads
43
Messages
187
I am looking at the quarter panels from S-O-R, they are the ones that are predrilled, notched and ready to bolt on and include the rear sill cover. I was wondering if anyone has installed these before, and how good do they hold up and how they look. they are 1/8" diamondplate so im guessing they are pretty strong. and the price isnt that bad either. any info would be nice. Thanks
 
I wasnt planning on doing the diamond plate, because it looks like you are hiding something, (RUST). but its a lot cheaper, and i would cut out the rust and use something like that in between the 2 metals. Im not sure what I am going to do yet, I just am looking around at my different options.
 
Steel diamondplate, painted to match the vehicle looks and works fine...


I am not a fan of alum. corners for multiple reasons, mostly, because I have seen so many ' clean ' trucks that have them, and they are nothing more than a ghetto, hacked up hunk of s***.



I use my junk, and, when I get my corners into a rock, stump, tree, dirt wall, etc, the paint is damaged. I have come to the conclusion that if I am going to take my junk out and use it, it is going to get scratched, bent, banged, gouged, period.




Look,

In 1995, I put a new tub on my truck in fourteen days, from the first cut to the time it was on the trailer going north to run it in the woods...the paint was less than 72 hours old. Had a great time, it was covered in WI red clay/mud crap from Pa Rockers. I build these things to be used, not for the museum. There are lots of other people that have very nice looking vehicles that I can look at when I need a fix, to me though, I cannot justify having the money invested in something that I am afraid of getting damaged. s*** happens man, I do not try to ball my junk up all the time, but I am going to use it to the limit, and try and push that...


Just me, to each thier own.


Good luck!


-Steve
 
I hear ya.

I'm not worried about scratching the paint or even putting dents in it, I use my 40 and plan on having fun with it.

I figure if I can add something that truly adds protection to the rig it's worth doing, and I won't be as concerned about sliding the rear corner on whatever to squeeze by a tight spot. :)
 
desertdude said:
I think most LC owners on this site frown on the aluminum plate. If you do install use something like this product http://www.vannay.com/eck.html between the metals

I'm just not convinced that the amount of corrosion you'll get is really a big deal. I've have aluminum diamond plate for protection and after it was removed several years later, there were no sign of corrosion. Maybe it is due to the fact that the rig is garaged.

Steel diamond plate can get real heavy fast. I've seen plenty of things on other cruisers that are much more gay than a set of diamond plate corners.
 
fj40charles said:
Steel diamond plate can get real heavy fast. I've seen plenty of things on other cruisers that are much more gay than a set of diamond plate corners.



These vehicles in stock form are not light by any stretch of the imagination....



" I've seen plenty of things on other cruisers that are much more gay than a set of diamond plate corners "


Could not agree more.


I recieved a lot of s*** about my roof rack...but that is not why I took it off...
Among other things, it served as a fantastic platform for female dancers.. ;)


:beer:



-Steve
 
fj40charles said:
I'm just not convinced that the amount of corrosion you'll get is really a big deal. I've have aluminum diamond plate for protection and after it was removed several years later, there were no sign of corrosion. Maybe it is due to the fact that the rig is garaged.

Steel diamond plate can get real heavy fast. I've seen plenty of things on other cruisers that are much more gay than a set of diamond plate corners.


I just happened to have these pics of mine I recently took off. As you can see corrosion can be a big deal if not prepped properly. Just my experience.
IMG_0049.webp
IMG_0050.webp
IMG_0051.webp
 
Poser said:
knight Hawk-



You know Mike Durant?

Nah, He was a NightStalker with Task Force 160th SOAR Special Operations Aviation Regiment. I met him at a book signing once though :rolleyes: . When I went to CrewChief school there were alot of teachers and folks who were actually there in Mogadishu when it happened. The Blackhawk community is actually quite small in the Army so everyone gets to know everyone eventually.

KnightHawks was my old company when I signed up with Mud and I just kept the name, might change it someday since it really doesn't apply anymore. Currently a Werewolf.
 
KnightHawk said:
I just happened to have these pics of mine I recently took off. As you can see corrosion can be a big deal if not prepped properly. Just my experience.

Just curious where the cruiser was located and if it was garaged or not.
 
Dude, I got it about 6 yrs ago and I'll tell you that in the time I had it it went through hell. Definitely not a "garage kept" cruiser. Looks like they were put on like 10-15 years ago or so, I'd guess. And guessing by the condition it was in when I got it, it was likely not garage kept before that either. Yes I agree that it could make a difference, though.
 
KnightHawk said:
Dude, I got it about 6 yrs ago and I'll tell you that in the time I had it it went through hell. Definitely not a "garage kept" cruiser. Looks like they were put on like 10-15 years ago or so, I'd guess. And guessing by the condition it was in when I got it, it was likely not garage kept before that either. Yes I agree that it could make a difference, though.

That would certainly make a huge difference. 3 conditions are needed for galvanic corrosion. If you garage your rig, then you eliminate one of the conditions (electrolyte).
Also, you'll notice that aluminum and mild steel are not too far apart on the chart so the rate of galvanic corrosion should not be that high.

http://www.engineersedge.com/galvanic_capatability.htm

http://www.metal-mart.com/Guides/Galvanic.htm
 
i run diamond plate and know a few that have run diamond plate corners with very good luck...like everything prep is the difference. first off, the sor and premade corners are too thin to do any good. second, i replaced the rotted steel, then primed, painted and finally coated with a good undercoating before applying the diamond plate to keep water from sitting between the steel and the aluminum. this is the second cruiser i've done this way. haven't taken the corners off this one, but the last one didn't rot at all. i bought scrap aluminum at the local aluminum yard and made my own (much thicker) corners for a quarter what specter charges.
 
Back
Top Bottom