Would someone put up a pic of the Demello front bumper. Thanks
Demello Front Bumper
- Thread starter Brazenhead
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yeah I had seen people talking about this bumper as well, but have never seen one. I think I'll Google it.........
TexasBadlands said:Yeah I had seen people talking about this bumper as well, but have never seen one. I think I'll Google it.........
Just went by Demello today, the bumper looks great on his rig, has just the one front loop. I may need to change from my ARB.
- Thread starter
- #6
How much of a hassle would it be to get a Demello bumper sent to Alberta, Canada? Or does Demello have a dealer somewhere near here?
Here's some picts:
Saw the Demello bumper on Jason's (Demello) Truck today, I may have to trade in my ARB, His is lighter and open infront of the wheels to allow better approach angles. Pictures do not do it justice.
FJTank said:Here's some picts:
Welcome to MUD!
calamaridog said:
Thanks, didn't have much of a reason to come here until I got the FJ..
Havn't seen you in ages.. You coming to the Big Bear run?Dang now I've got another board to check everyday.. lol..
FJTank said:Thanks, didn't have much of a reason to come here until I got the FJ..
Dang now I've got another board to check everyday.. lol..
I'll be in Vegas instead
Mud is a good board too. Post up some pics of all your Demello stuff!
Ordered mine over the phone today; was told about three weeks. They said there has been a huge demand for these but they hope to catch up. Right now, one of their cutters (water jet, death-ray laser, ?) is down so they are behind.
Now to go winch shopping. They said they knew for sure that a Warn M8000 would fit but they haven't seen a lot of others tried.
Now to go winch shopping. They said they knew for sure that a Warn M8000 would fit but they haven't seen a lot of others tried.
BTW, here is a thread I started over at fjcruiserforums.com comparing all the bumpers (that I know of).
http://www.fjcruiserforums.com/forums/showthread.php?t=8738
Feel free to post info I missed or got wrong on any of the bumpers.
http://www.fjcruiserforums.com/forums/showthread.php?t=8738
Feel free to post info I missed or got wrong on any of the bumpers.
Thanks for your thread Landrover, it is helpful to all. I put together my own similar list in shopping (I'm on the fence between Exped 1 and Fab Fours). One minor fine point I found in my research is re. plate thickness on the Exped 1 provided below:
From Expedition One thread: "Plate thickness: On this bumper we're using a combination of 10 gage and 7 gage.. 10 gage messures out to be about .135" thick so jst a bit over an 1/8th of an inch. 7 gage is about 0.18" thick, just under 3/16" thick. Most people would probobly just refurer to them by the common inch messurement, calling 0.18', 3/16" and so-forth. Its a little wired when it comes down to it though becuase some one could say there using 1/8th inch and be using 11 gage wich is just a bit below that in real size: somthing like .118 or somthing...?... On our other bumpers we use 3/16" and somtime 1/4", but becuase there were so many concerns with weight for the FJcruiser crew we decide to adjust on this bumper. Weight, with a single hoop is going to be about 105 lbs, which is about what all our other front bumpers weigh."
From Expedition One thread: "Plate thickness: On this bumper we're using a combination of 10 gage and 7 gage.. 10 gage messures out to be about .135" thick so jst a bit over an 1/8th of an inch. 7 gage is about 0.18" thick, just under 3/16" thick. Most people would probobly just refurer to them by the common inch messurement, calling 0.18', 3/16" and so-forth. Its a little wired when it comes down to it though becuase some one could say there using 1/8th inch and be using 11 gage wich is just a bit below that in real size: somthing like .118 or somthing...?... On our other bumpers we use 3/16" and somtime 1/4", but becuase there were so many concerns with weight for the FJcruiser crew we decide to adjust on this bumper. Weight, with a single hoop is going to be about 105 lbs, which is about what all our other front bumpers weigh."
Blues Dawg said:
+1, and on fjcruiserforums.com also.
Photos of my Demello bumper installed, without a winch (yet - M8000 on order).
