Dash Knob Sleeve

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 26, 2003
Threads
183
Messages
813
Location
Next to the Falls in OH
Hey all,
Does anyone know what the proper lenght of the dash knob sleeve should be? It is the metal sleeve that fits over the winshield knob(handle over bolt). This is for a 1980 FJ40 it appears from SOR that they are the same from 68-84 I just do not think $10/ea. is worth it if I can copy it. The part is never seen. It is part #2 in the pic.
Thanks
 
Mine are 41mm in length. GL
Ed
 
Leave it out. Mine prevented fine tuning the window to where the door fit just right.
 
Leave it out

I would leave it out if I was running a HardTop but with my softop the windsheild seemed to move a little too much for my liking and I am thinking that softtop may fit a little better with them in there.
Thanks
For the info I will just cut one of those shock bushing spacer things to the proper lenght.
 
I see what you mean, for the ST.
 
MJM said:
I would leave it out if I was running a HardTop but with my softop the windsheild seemed to move a little too much for my liking and I am thinking that softtop may fit a little better with them in there.
Thanks
For the info I will just cut one of those shock bushing spacer things to the proper lenght.

I used a shock bushing too. I have a hard time driving with the ST off, My windsheild vibrates alot without the upper mounts.
Have fun :cheers:
 
Back
Top Bottom