CT26 17201-17010 Vs CT26 17201-17030

[andrea-PE-ITALY]

Hallo all from Italy, does someone knows differences between these two CT26 model OEM? I have one on the table with the hot side labeled as 17201-17010 but on his wastegate the label is 17201-17030. Might be possible that differences between two models is wastgate pressure only? Thanks a lot in advance.

 

[Dougal]

My collection of notes says the 17010 housing is mid-size round. I don't have any notes for 17030 or 17040. They should all be 1HD-T or 1HD-FT.
17020 is the smallest turbine housing with the round entry (Ct20B for 1HD-FTE) but that's not what you're asking.

 

[andrea-PE-ITALY]

My collection of notes says the 17010 housing is mid-size round. I don't have any notes for 17030 or 17040. They should all be 1HD-T or 1HD-FT.
17020 is the smallest turbine housing with the round entry (Ct20B for 1HD-FTE) but that's not what you're asking.

tanks a lot, step by step.....we'll gain all informations. As soon as possible i dismantle my 17030 from my toy in order to compare with 17010 i have on the table for upgrade. thanks again

 

[mudgudgeon]

Search the "gturbo alternative tech" thread for the Mellett turbo catalogue. It has charts showing different variants and what models they are used in.
lots of other good info too

 

[andrea-PE-ITALY]

Search the "gturbo alternative tech" thread for the Mellett turbo catalogue. It has charts showing different variants and what models they are used in.
lots of other good info too

good!!! I'm going to search for

 

[andrea-PE-ITALY]

good!!! I'm going to search for

found it. 111pages to read .......an adventure....