Cruiser Leans

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 29, 2007
Threads
102
Messages
759
Location
S. Jersey - New Germany
My cruiser leans to the driver side almost an inch both front and rear. I've just upgraded my front springs from 851s to 850s after putting a new bumper and winch on my truck. Also the lean problem existed with the 851 springs too. I even went as far as to pull the rear springs to double check that I had the taller spring on the driver's side also.

I've read a lot of threads concerning this and made sure that my springs have been installed correctly with the taller spring on the driver's side and seated correctly. I've just ordered a 10mm packer both for the from and the rear to help the lean problem. In reading some of the threads I come across the term "Cruiser Lean". Is there a specific reason for this?
 
Yes. OME springs are crap.

And you probably have them installed on the wrong sides.
 
Nope, they are definitely on their right side. If I would switch them I would have to put the shorter spring on the driver's side and the lean would be worst.
 
Yes. OME springs are crap.

And you probably have them installed on the wrong sides.

You don't like OME springs?

EDIT - OK. Let me rephrase that. Why don't you like OME springs?
 
Last edited:
Back
Top Bottom