I apologize in advance for cross posting, but I want to make sure that this gets seen ASAP.
I'm sending this to a couple of different mailing lists and internet forums. If you can help, or you know someone who might be able to, contact Me ASAP at this email... cruiser@mtaonline.net ...or at (907) 373-3789. Or contact Jim direct on his cel at (612) 916-1765.
All of you on a couple of these lists and most of you on the rest know Jim Van De Ven. Him and his wife Deb are currently working their way back home (Minnnestoa) from the Alaska Cruiser Trek. I just got off the phone with him. His FZJ80 suffered a front wheel bearing failure at 75 mph on the highway between Seattle and Spokane. He is sitting in a town called Ritzville right now in need of a front spindle and hub assembly. Wheel bearings too of course.
Jim can handle wrenching duties and I'm sure he has the needed tools. But he needs PARTS!!!
If you can help or can suggest someone who can let me know ASAP.
I just talked with Jim, and he will need a hub and spindle....The inner roller is welded to the spindle and the hub is pretty wasted according to him....
I've also lined up a set here in Alaska. John reminded me that we had a hub/spindle for an '80 stashed in a corner and forgotten at the shop. (Just gotta look it over and verify that it is in good shape, but I'm 90% sure that it is.) So if we can't find him something locally to him, I can Fed Ex this out in the morning. I've got a message waiting with Jim to see what has transpired at his end since we spoke last.
Just got a note from Idaho too. Looks like Eric V has some parts also. Sounding like we just have to figure out which option is gonna be quickest and easist to get them back on the road.
You simply have to love the feel of community that exists in the Cruiser world. I know that I do.
I can remember incidents in the past when I was stranded on the road somewhere. Long before the internet and the Cruiser Brotherhood. Much more depressing and daunting situation than the support that we can offer each other these days.
Just talked to Jim a few minutes ago. We thought that we had located a hub/spindle set fairly close to him, but it didn't work out. I was on my way to FedX to send him a set I came up with here. He was putting the rig back together when we spoke. He had found wheel bearings at NAPA . He dresses the spindle with a file to fit the bearing over it. He put about 20 good deep punch marks in the face of the hub where the outer race seats. This and some "green" locktite (designed to secure bearings in loose bores and things like that) will hopefully provide enough "gription" to keep the outer race from trying to spin before they make it the rest of the way home.
We received an offer of a truck and trailer out of Montana (Thanks Lynda!) so I guess if he can't get the rig home, there is still a backup... Or I can Fed X the parts to the next town that the wheel fails in...
But it looks like things are under control now.
Jim has asked that I pass along his thanks for the immediate offers of help that came flooding in.