Cruiser Diary....or Dairy??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2003
Threads
284
Messages
8,118
Location
Kansastitty
I am on a break from work and planned to work on the cruiser this week. Swapped in a '77 front axle into my '66 and added 4W disc brakes, Corvette master and all new brake lines, which I'm bending....not my element.
Today I installed the rebuilt calipers(Stock LC). After installing the calipers, I noticed that I had a couple of parts "left over", hah. I guss they are really important, probably to keep tha caliper bolts from going too far home and rubbing on the rotor. They are in the picture as part #26.
Anyway, I'll take everything apart and install them tomorrow.
I've just heard about guys/gals running W/O the dust covers on front DB, so is anyone doing that?

Thanks, didn't know whether this belonged in Chat or Tech.

Ed
discbrakes.gif
 
Last edited:
" Thanks, didn't know whether this belonged in Chat or Tech. "


Cute Ed....



Have been running without dust shields for years now...no biggie.


Good luck!


-Steve
 
nuclearlemon said:
i've got my front dust covers, but i don't know why...i just keep having to bend them back off the rotor. the rears on my 40 have never had a d.c.

Good to know Ige, as I just put the Poser RDB's on my '40. I wondered why I needed them on the front and not the back. Since I've got the fronts and have gone to a great deal of trouble to straighten the driver's side, I guess I'll take all that crap off and bolt on the "leftovers".
Another day in Cruiserville. Glad I don't need to make a living as a wrench...it would never happen.


Thanks all,

Ed
 
Back
Top Bottom