Cross over steering conversion question

[cruiser88]

My junk still has that factory control arm going from the carrier to the frame. Is that s***(the brackets themselves) in the way of the crossover steering and the bracket on the frame(cosidering the IFS box). If so I have the torch ready to cut them off.....if not I am just going to take the arm (rod) itself off.

 

[cruiser88]

Wristy saved the day. Wristy sorry I had to get off the phone so quick.....I forgot to turn his reg. off and I had gas leaking.


For future refrence wristy said the mount for the control rod could stay......so I am leaving it but I torched the control rod arm off the axle housing

 

[toy4xfun]

i believe wait i will go look before i make myself stupid.

 

[cruiser88]

You dont have cross over/high steering?

i believe wait i will go look before i make myself stupid.

 

[toy4xfun]

that is a torque rod (prevents axle wrap).

 

[hardontoyotas]

you may have to cut the bracket for the torque rod. i had to when i installed my high steer and ifs steering box.

 

[cruiser88]

the one on the carrier or the bracket on the frame?

you may have to cut the bracket for the torque rod. i had to when i installed my high steer and ifs steering box.

 

[Tools R Us]

I have always cut all of that stuff off when doing x-over. It's not needed, in the way and looks cob if left on.

 

[cruiser88]

I have always cut all of that stuff off when doing x-over. It's not needed, in the way and looks cob if left on.

 

[hardontoyotas]

i just cut my off at the frame

 

[cruiser88]

The bracket had to come off for the adapter plate. drove it home last night still have not got it welded yet