Cross Country .... and back

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 19, 2020
Threads
2
Messages
23
Location
Roseville, CA
Long post... what a trek

2000 LX 470 new to me in late January. 163K miles or so at acquisition. I still dont have title as of this writing. Good friends sister passed away, i grabbed vehicle for what i think was an absolute steal at the time that nothing scared me.

Change all fluids myself immediately. Except Brakes and AHC. Still waiting on proper cable.

Mid Feb, in stead of moving from nor cal to fort lauderdale company entices me to go early (return at will). One issue. i MUST get the lexus there. it's one of 4 cars, so i only have so much car expense i can tap into. So, i order 1400$ worth of michelin defenders (x5) and a agm from batteries plus at $300 or whatever and im off.

Mar 2 depart. early am start in flagstaff at 28 degrees. after typical let it warm up period i head down road. within 1/2 mile (maybe first time i hit brakes) ABS light was definitely lit and many others. and internal beeping/warning grinding me to get to a parking spot fast,, i think im toast (this is morning ONE!). I got it parked, waited a few min, looked under hood, started it back up and no issues still til this moment with that again. whew... i dont consider it solved.

Arrive with no other issues. saw 17 mpg one tank. never 18

work a week, then try to go find an apartment and fast forward..... realtors arent really showing apartments during this time, so i now am at a standstill... i either ride it out in a VRBO/Hotel, or return home to wife and kids..... easy answer.... here we go damn it...... lmao.

return is fine, i reach 169700 miles and know exactly what that means... oil change time. i do it at a local alabama quick lube, was first in line. had my own oem filter and mobil 1 went in.

drove through a flood or so it seemed south of dallas, 5 or 6 lane wide northbound drilled down to 1 lane on left... my dums ass not smart enough to raise the vehicle (wel, lets be real, no one knew it was closed due to water, it would have had to of been a snap decision and then in turn a hold up everyone, i gotta push that button...lmao)

fast forward that afternoon, i could have sworn i thought i saw a gauge dial bounce out of corner of eye. ya... i did. the alt would have bounced from 13.5 to 9 i would say from what i think i say and what i now know.......

after next stop for petro in albuquerque i get heading down road 10 miles or so and batt/alt light comes on. argh..... so i pull over and check cables.... sure enough, positive cable real real loose, so i tighten it. hop back in car and now in theory im between albequerque and gallup, NM... i either continue west or back east. i choose (having AAA) and continue west. i get to Gallup, auto zone or whatever, battery 12.84 alt 12.2 he says and not charging, i see on dial. so up to toyota/chevy dealer..... 24 hours later, back on road. oreilly auto alternator was in stock, not oem. $560.. price and the fact i dont have my oem alternator kill me, BUT, im home. completed 6500 mile round trip.

170k miles now. just went 7000 round trip across country and back. no sore back, no sore hips., no sore neck. a lot can be said about the comfort of that trip. i left it one click from comfort (far left) on dial.
 
Last edited:
oh ya... on start up. every morning, even in cali from garage. or in florida, so its not just cold related. I can hear a pump priming/gasping. it does it 5-20 times normal temps above 60. flagstaff it seemed to do it for a minute or 2. i got out and reviewed brake reservoir.... appears it is bubbling back each gasp as i can see the fluid move in reservoir.
 
That priming gasping sound is no good, along with the bubbling, your booster is not holding pressure. You can try to rebuild the piston, but at this point i think you're looking at replacing the pump/booster assembly.
 
Look through the sticky threads on top of this forum, my buddy had the same issue and i ended up replacing the whole unit for him. Not too bad of a job, you'll need a scanner that can bleed ABS or Techstream.

 
great stuff. i have read that thread on replacing all, will be back at it for sure and re reading now. worth the investment at this stage. i wouldn't be lying if i said the obd cable for techstream form china cleared sfo customs today, i should finally have in next week or so. ordered early feb. that in itself has been a bit of a production for me to find a cable that matches the version of techstream i have.
 
Last edited:
Back
Top Bottom