Cooling system question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 21, 2008
Threads
11
Messages
38
So yesterday I popped the hood to check things out and noticed that the radiator was low in coolant and my reservoir was filled to the brim. I was having the oil changed and the tires rotated so I went ahead and had the shop flush the cooling system. After driving home and letting things cool down I checked the radiator and saw the same thing...radiator low in coolant...reservoir filled to the brim and obviously overflowed (saw coolant near the reservoir) but didn't dump a bunch of coolant on the driveway. I popped the reservoir top and didn't see a tube extending from the top into the reservoir fluid. I thought there was supposed to be one but maybe I'm mistaken.

So what's going on????? Engine is running very smooth so I don't think it's a blown head gasket.
 
yup, easy to fix.
When the coolant gets hot it expands, the cap releases and the coolant goes into the overflow tank. When the coolant later cools again, it contracts back, that in turns creates a lower pressure and the coolant is aspirated back to the rad. Of course, for that aspiration to take place there must be a tube going down to the bottom of the overflow tank from the overflow cap so the coolant can be physically sucked back up.
 
Sounds like the shop that did your flush took it off for some reason and didn't put it back?
 
Back
Top Bottom