Cold Air Intake without Snorkel

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 22, 2013
Threads
56
Messages
481
Location
48.493445, -116.881603
Website
www.orttauq.com
I did a quick search but no joy...has anyone come up with a solution? Don't want a snorkel but when IAT is 30 to 40 * above outside air temp I have to look at option/ideas.

Or should I even be worried? When towing the boat it can get to north of 210* :eek:
 
I did a quick search but no joy...has anyone come up with a solution? Don't want a snorkel but when IAT is 30 to 40 * above outside air temp I have to look at option/ideas.

Or should I even be worried? When towing the boat it can get to north of 210* :eek:

I was running IATs of 170 to 180. Those all dropped to within 5-10º of ambient after the snorkle. Just food for thought.
 
I would also like to get the benefits of a snorkel without one. I have been considering installing a louvered vent in the fender where you would install a snorkel. I haven't seen how the snorkel seals off the inside of the fender but I would think it can't be that difficult. I'm not looking to do deep water crossings. I would like to get intake temps down and keep the air cleaner from getting loaded up on gravel and dirt roads. Anyone have any ideas?
 
Let's not overthink this: 1. You should tow a boat with a diesel or crappy ol Chevy or something 2. putting louvres on the side of your fender will only invite flash floods 3. If you go to Vegas for the shows I don't want to wheel with you, fyi.

Zona
 
Your not the only one with high IAT! This was just after driving 80 mph! makes me think something is wrong

Screenshot_2016-07-19-17-47-59.webp


Edit.... 285/75R16 tires. Guess my speedo is off
 
image.webp

This is super bizarre timing.. I was just coming up with some ideas to get cold air outside of the fender, ran in to this jeep hood from TMD..emailed them last night to see if this side vent piece was available separately from the entire hood, and it can be had for $50 for both sides (they'll send a paypal invoice)..was thinking this might blend in to the top of an 80 fender and attach with some panel bond or high grade 3m adhesive.. TMD advised it was abs plastic..IIRC it may line up with the factory intake that fits inside the fender?

Full disclaimer: Are you thinking about how important it is to let everyone know that this mod serves no real purpose, and the quad coeficient decibel threat matrix is unmodified? everyone knows don't be a buzzkillington
 
I have an EMS prototype cold air intake with a dry AEM-style filter that I like. It sits where the stock intake is, but has a metal box that I then lined the outside of with Thermo-Tec. I like the sound, but don't have an IAT to back up anything else about it.
 
Back
Top Bottom