Code 14 or Code 41?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 23, 2005
Threads
13
Messages
576
Location
Beaverton, OR
Okay, here's the dumb question of the day...

I finished my head gasket, all is good. I threw the paperclip in to doublecheck the timing, and I get either 1 flash followed by 4, or is it 4 flashes followed by 1? Code book says 14 is igniter circuit and 41 is throttle position sensor. Any input?
 
Which one is it ?
 
Should be a longer pause between two codes than between two digits of the same code.

So for example, if it's code 14, there should be a longer pause after the four flashes than there is after the one flash. In fact, according to this site, there should be only a 1.5 second pause between the digits, but a 4.5 second pause before the code is repeated.

Get it? :)

Curtis
 
Perfect, that's exactly the answer I needed. My FSM is sitting in my brothers toolbox 45 miles away.

Thanks!
 
Back
Top Bottom