CO2 and Air Tools

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 5, 2008
Threads
53
Messages
121
Location
Western Washington
I've been looking at on-board air or CO2 for awhile and decided to go with CO2 due to simplicity and portability (multiple trucks). I'd also like to use it to run air tools in a pinch. Most of the time I use the compressor at the house, but every once in awhile it'd be nice to be able to use nail guns, impacts, air chisels, etc... out in the field. If any of you have tried or set up your rig to do it, pic and how to would be awesome. Thanks for helping out a new guy.
 
Using air tools with CO2 is not complicated. You need a way to oil them if you plan extended use. The tool will get cold with extended use. You should use a variable regulator on the CO2 tank or choose a static regulator in the range of the air tools you will use (will slow down airing up tyres though.)

-B-
 
Nothing Complicated at ALL. Be sure to keep the tools oiled - up. Get a fish scale and keep track of the empty and full weight of the tank (you can't use PSI to measure liquid CO2) so you will know how much CO2 is left. I have used my air tools in a pinch to bust loose a lug nut but they do use up lots of gas. I like to keep about 2LBS reserve left in the tank in case I have to seat a bead.

I have the tank mounted in the back of my'60 and the air hoses/tools stored.


Mark
 
Back
Top Bottom