Clutch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 10, 2006
Threads
99
Messages
501
Location
The Ghetto
I have an NP-435-GA tranny and I find it hard sometimes to engage the clutch. Reverse sometimes grinds when I try to put it in gear. I'm thinking it might be a slave or master issue. What can I do here?
 
Hi All:

I'd imagine the "hard to engage clutch" issue has to do with adjustment of the clutch slave cylinder rod. Regarding the grinding noise when trying to shift into Reverse, that is common on many manual trannys. Try shifting into Second and Third gear before trying Reverse; this can help get the gear syncros back into proper alignment to allow shifting into Reverse.

Do you know what vehicle your NP435 came from? These trannys were used in both Dodge and Ford trucks; have a proper manual that covers the version of the tranny you have would make it easier to adjust the clutch, etc.

Good luck!

Alan
 
That's what I figured. I do have some play in the pedal. It goes about halfway down before I feel pressure. I'm not sure what vehicle this came from...I have a Chevy 305 so i'm assuming it's from a Dodge maybe. I'll take pictures soon. Thanks.
 
Back
Top Bottom