clutch tech trivia

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 13, 2003
Threads
12
Messages
57
Location
Medford, OR
Does the Advance Adapters V8- Toy 4 speed bellhousing retain the stock clutch setup or require a chevy pressure plate and clutch plate?

Gotta buy parts today, Thanks!

Mike
 
Juice said:
Does the Advance Adapters V8- Toy 4 speed bellhousing retain the stock clutch setup or require a chevy pressure plate and clutch plate?

Gotta buy parts today, Thanks!

Mike

I'm resisting the urge to blast you for asking a dumb question.........HTF are ya gonna connect Toyota parts to a GM engine?

It uses a low clearance GM setup, best to use the stuff the donor engine came with for instance on my FJ40 it is a 12" setup, but on one I did an NV4500 it used an 11"

Butch :D
 
"HTF are ya gonna connect Toyota parts to a GM engine?"

Um... the bellhousing adapter?

Makes sense that it would be a GM clutch to match the flywheel, I just wasn't sure because the Advance adapter site didn't say which for theirs but said to use stock components for the Mark's adapter that they offer.

Thank you for your help... and thanks for not blasting me too I guess :D

Mike
 
Juice said:
"HTF are ya gonna connect Toyota parts to a GM engine?"

Um... the bellhousing adapter?

Thank you for your help... and thanks for not blasting me too I guess :D

Mike

The bellhousing adapter is just a big hunk o steel with GM on one side and Toyota on the other, did you get a flywheel and related components with your engine?
Butch
 
The PO bought the original parts, it appears to be a Centerforce clutch right now. Everything is installed and has worked, I just wasn't sure what parts to use to replace the broken stuff.
 
OK, when you are ready to buy the parts take the Centerforce with ya, you need the OEM version, the critical thing is the height of the p plate fingers, this needs to be the same...GM makes 2 versions and they do not interchange with a hydraulic setup.
Butch
 
yep, the pressure plate is the critical part...the throwout IIRC is Toyota stock, the disc is GM stock, and the diaphram pressure plate is GM....

3-finger pressure plates don't work, my AA setup ran some morph combo of junk when I bought it in 1989, went thru 3 clutches in a year, got my first Toyota Trails, ordered a Centerforce thru Downey, and never had one issue after that.....
 
Thanks for all your help guys...

I had this setup out last year to replace bearings (should have done all of it at the same time, oh well), the pressure plate has more than 3 fingers.

Napa or Parts Plus should have equivalent AM parts, correct?
 
Back
Top Bottom