Clutch inspection/condition check

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 27, 2005
Threads
47
Messages
201
Location
Roseville
Anyone know of any tricks to find out what condition a clutch is in? My cruiser I bought last year had unknown mileage on the clutch. It shifts good and does not slip or chatter at all.

Thanks --- Fman
 
1) If your e-brake works, set it. If not, nose up against something that's not going to move (e.g. really big tree or something)

2) Put truck in third.

3) Let out clutch.

Engine will stall if the clutch is good. If engine continues to run, you need a new clutch.
 
Last edited:
You can gauge clutch condition by how far from it's normal engagement point the vehicle continues to run. You can give it plenty of throttle while doing this and you ought to limit the number of times you try it.

Couple times won't hurt it but several tries will.
 
4 grand drop...


If it spins you need a new clutch..


Honestly, if you have not noticed an issue yet you are proably good to go..
 
Mace said:
Honestly, if you have not noticed an issue yet you are proably good to go..
Double true. Way back, I knew the clutch on my 240Z was gone when I would punch it on the highway. I could hear the engine rev, but the rest of the car would not accelerate along with the engine rpms. Drove it for about a week like that, then fixed it at my first chance.
 
Back
Top Bottom