Cleaning fresh air intake

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 20, 2013
Threads
69
Messages
706
Location
Missouri
Guys, I did some searching I didn't find anything, but that doesn't mean that a post on this isn't out there. Is there any tricks/tips to cleaning out the cabin fresh air intake area? Last winter my rig was in the shop and my mechanic mentioned that i might try and clean it out, as he noticed alot debris and the heater wasn't real hot. I assume air comes through the hood vents and circulates around the heater core, correct? Any help will be appreciated,thanks
 
From what I have read the core is buried in the dash and no fun to get to (dash removal and such). Make sure the blower and evaporator are clean as well as the cowl area. What temps do you see in thew vent with the heat on high? It may be that your mix control knob (likely not the right tech term there) may need to be adjusted. Do you get good air flow in the vents? Happen to know the coolant temp when driving?
 
From what I have read the core is buried in the dash and no fun to get to (dash removal and such). Make sure the blower and evaporator are clean as well as the cowl area. What temps do you see in thew vent with the heat on high? It may be that your mix control knob (likely not the right tech term there) may need to be adjusted. Do you get good air flow in the vents? Happen to know the coolant temp when driving?
I haven't taken a vent temp, I just noticed that it is considerably cooler than the rear heater. The mechanic adjusted the mix control and I feel like I get good air flow from the vents. I don't have a mod or scan gauge so I don't know the coolant temps while driving. Thanks again
 
Back
Top Bottom