Check engine light

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 22, 2005
Threads
100
Messages
872
Location
Santa Cruz Mountains,CA. TLCA#7702
The ol' check engine light came on today.I am posting first,doing a search later.I will find out how to check the codes(paper clip),toyota of SC has checked it for free in the past.Then I got the hell out of there!
Last time it was the 02 sensor(s)
What now my 93 80 has about 173K,needs a tune up.Just got done doing the rubicon& I have been hearing some exhaust vibraitions.
Thanks,John
 
It's your EGR system. I've had 2 different people work on mine, both times it was the EGR system, and both times, zero results. It's been on since December.
 
Ok,so my question is how do I pull& read my code(s) using the paper clip?

On a 93-94 80....Find the grey diagnostics port on the firewall toward the passenger side. Remove the cover. Turn your ignition to the ON position. Have someone sit in the driver seat and watch the CEL. Using a paperclip connect terminals E1 and TE1. The inside cover of the diagnostic port will provide a key showing which hole is which. The person in the drivers seat will count the number of times the light blinks. For instance 7 blinks followed by a pause and then 1 blink would be a code 71. Code 71 is an EGR system malfunction and is the most common.

To reset the CEL pull the EFI FUSE in the fuse block under your hood for 1 minute.

If you do have a code 71 there's a ton of stuff on 'mud about fixing it. It's all :banana:
 
Thanks guys for the replys! MoJ thanks for the instructions on pulling the code.So it could be the EGR ,thats wierd cause the truck just got
smogged& passed about a week ago.
My friends 93 80 did not pass smog& it was the EGR valve? He got it fixed,then passed.I will talk to him about that.
Thanks,John
 
On a 93-94 80....Find the grey diagnostics port on the firewall toward the passenger side. Remove the cover. Turn your ignition to the ON position. Have someone sit in the driver seat and watch the CEL. Using a paperclip connect terminals E1 and TE1. The inside cover of the diagnostic port will provide a key showing which hole is which. The person in the drivers seat will count the number of times the light blinks. For instance 7 blinks followed by a pause and then 1 blink would be a code 71. Code 71 is an EGR system malfunction and is the most common.

To reset the CEL pull the EFI FUSE in the fuse block under your hood for 1 minute.

If you do have a code 71 there's a ton of stuff on 'mud about fixing it. It's all :banana:

Another thing that you can do is short the terminals as described above, but then sit in the car and turn the ignition to "ON." That way, you don't need a second person.
 
Although I do not agree with your "post first, search later" mentality, I will add a tidbit of info to the thread.

After pulling the EFI fuse, it will take the computer some time to recalibrate. I experience a drop of idle RPMs (~400 instead of ~600) for about a day after pulling the fuse.

I had a code 71 for over a year and a new EGR modulator fixed the issue for now.

Riley
 
Another thing that you can do is short the terminals as described above, but then sit in the car and turn the ignition to "ON." That way, you don't need a second person.
Or, you can turn the ignition to ON, then run around to the engine bay and stick the paperclip in, and then run back to the driver's seat to read the codes. Or... :D
 
Or, you can turn the ignition to ON, then run around to the engine bay and stick the paperclip in, and then run back to the driver's seat to read the codes. Or... :D

You don't even have to run, the codes will keep repeating...............


OR you could divide the cruiser into 4 quadrants...........
 
Thanks guys for the replys! MoJ thanks for the instructions on pulling the code.So it could be the EGR ,thats wierd cause the truck just got
smogged& passed about a week ago.
My friends 93 80 did not pass smog& it was the EGR valve? He got it fixed,then passed.I will talk to him about that.
Thanks,John

Mine failed smog because the check engine light was on. I took it to Mudrak and he showed me how to turn off the CEL, and I took it in an hour after the failed one and passed.

So I'm guessing that unless your components are completely toast, turning off your check engine light will make you pass smog. Like, as long as there is a little bit of functionality left in whatever's making your light come on.

And that's a California smog test too. They're bitchezz here.
 
Back
Top Bottom