Check Engine Light Turning Itself Off?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 1, 2018
Threads
4
Messages
15
Location
USA
I took a 2000 Land Cruiser I am interested in to a shop for a independent inspection. While the mechanic was test driving it, the check engine light (plus VSC and ABS lights, I think) came on.

They were still on when I picked up the vehicle. I did some additional driving, perhaps 5 miles plus some loops in a parking lot, including stopping and starting the engine 3 or 4 times (not intending it to be related to the lights). The last time the check engine engine light and others didn't come on.

I dropped the vehicle back at the Toyota dealership and asked them to see what code came up but service was closed until Monday.

It seems strange to me that the check engine light would go out on its own. Is this normal or possible. Any potential explanations?

Thanks in advance.
 
They clear themselves after a certain number of cold starts when the problem hasn't occurred again. Totally normal. You may have just had a wonky connection with a wheelspeed sensor that hasn't broken the circuit again yet. The ECU will store some codes for a while too, so they may still be able to pull those and see what's up.
 
I took a 2000 Land Cruiser I am interested in to a shop for a independent inspection. While the mechanic was test driving it, the check engine light (plus VSC and ABS lights, I think) came on.

They were still on when I picked up the vehicle. I did some additional driving, perhaps 5 miles plus some loops in a parking lot, including stopping and starting the engine 3 or 4 times (not intending it to be related to the lights). The last time the check engine engine light and others didn't come on.

I dropped the vehicle back at the Toyota dealership and asked them to see what code came up but service was closed until Monday.

It seems strange to me that the check engine light would go out on its own. Is this normal or possible. Any potential explanations?

Thanks in advance.
Historic codes are kept in the ECU until cleared. As long as the battery power hasn't been interrupted, Techstream will show the code that was set.
 
Just spoke to the salesman and he said the code had to do with "roll stability". That sounds like a bigger problem than I had hoped, especially since on Friday the dealership was saying they had no margin for additional refurbishment and yet today they are willing to fix that and a few other things I brought up as well (windscreen chips and sticky driver door lock).

All of that will take until Friday to repair. Almost seems like they want to get it sold to a willing party ASAP before other problems show up. The previous owners traded it in with a decal showing Costco had installed new tires only 3 months ago, which makes it seem they weren't intending to get rid of it.

Contacted them again for the specific code and, "The code is P1126. It's for a server motor for the throttle body." Searching leads me to discussions ranging from Throttle Control Motor replacement to exhaust problems suggesting O2 sensors and/or CAT replacement.

Is this a big enough issue to be a concern when purchasing a used vehicle that will be taken off road?

The secondary inspector did say that, although it is not a concern at the time, the exhaust is pretty much all fused together from rust that would require replacing everything from the manifold back, including CATs ($2-3k job). Other than that though the vehicle has essentially zero rust. He said that was to be expected along with the worn suspension given the vehicle age. Acceleration and shifting all seem fine.

I will also mention that there is no record of timing belt replacement, currently ~175k miles. But my understanding is that would be a sudden catastrophic failure with no real prior symptoms.

Thanks again for your input!
 
Back
Top Bottom