cheap birfeilds

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 17, 2007
Threads
30
Messages
183
Location
Westbank B.C.
is there such a thing? I found a few chinese versions on ebay is this a good rout to go for a stock 80 or are they "subpar". I am trying to lessen the cruiser clunk I have and come to find that the splines on the birfs are toast. So now that I have new drive plates the clunk is 60 % better but now Im wrecking the new drive plates cause the splines are baked. Any how Im basicly being forced to "do" the frontend and need your advice
thanks Norm
 
As much as I wanted to purchase Mr. T's birfs,,,,I did not. Cruiser parts supplied aftermaket birfs with abs rings for a fraction of the cost. Let me state that I do little if any off road travel. So I felt this was a good way to proceed. One week down and so far so good. Now if I was in thew west to southwest and spent many an hour on the trail....then Dan would have had my business.

Good luck!
 
I saw on Martin Crawler's website that they carry the EMPI birf; only like ? $80 each. Not sure about quality, heat treatment, hardness, etc. NAPA carries a Birf; think it may be the EMPI, but not sure either; someone else will chime in later for sure; it has been discussed before.
 
I saw on Martin Crawler's website that they carry the EMPI birf; only like ? $80 each. Not sure about quality, heat treatment, hardness, etc. NAPA carries a Birf; think it may be the EMPI, but not sure either; someone else will chime in later for sure; it has been discussed before.


Marlin Crawler does not carry the birfs for 80's....just the other Toyotas that use birfs (like the mini trucks, 60's, etc.). Boy did I get excited for a few minutes there...good quality birfs (DD grade) for $80 bucks each!? :eek:
 
Back
Top Bottom