I have a slight “looseness” feeling in my steering wheel when unweighting over bumps. It’s especially bad on chattery dirt roads.
I have replaced UCA and LCA bushings and ball joints. Full AHC delete with OME kit, and new steering rack with new tierods. I also have my sway bar removed. (All of those not done solely on the idea of fixing this looseness but I was hoping it would be a by product)
Literally the only thing that I think could possibly be the problem is the passenger side UCA, it moves freely when torqued and I can wiggle it side to side.
Any other ideas or people who have had this same problem? I’m kinda lost on what it could be (unless it is that UCA).
Thanks!
I have replaced UCA and LCA bushings and ball joints. Full AHC delete with OME kit, and new steering rack with new tierods. I also have my sway bar removed. (All of those not done solely on the idea of fixing this looseness but I was hoping it would be a by product)
Literally the only thing that I think could possibly be the problem is the passenger side UCA, it moves freely when torqued and I can wiggle it side to side.
Any other ideas or people who have had this same problem? I’m kinda lost on what it could be (unless it is that UCA).
Thanks!