Center Console Bolt strengh

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 11, 2005
Threads
15
Messages
81
Location
San Francisco
Hi All,

I plan on adding a tablet PC to my 94 80. I would like to use the bolt that is in the center console front cubby under the carpet. Specifically the cubby that is between the armrest and the shifters.

The bolt looks pretty big, and strong enough for what I am doing, but I wanted to make sure it is anchored to something strong as well, not some platic bracket. I was not able to find a picture of the area.

Anyone have an opinion in this? The tablet is lighter than most laptops, and will be almost directly above the bolt.

write up to follow if successful.
 
a friend of mine used a littel more sturdy platform. see pics.
IMG000081.webp
IMG000091.webp
 
The bolt does go into metal. I've had this apart enough times to know. I (however) would not use it as a single point of support for a notebook computer. With any kind of rod on there you're increasing the lever arm forces dramatically.
 
I'm using the center bolt option on my truck. I have a base plate cut to the exact size of the opening. This seems to help wedge it in place also. I had to use a slightly longer bolt. Doc is correct about the leverage but so far no issues. I would like a different solution to mounting due to the loss of a cup holder. I did develop a small crack in the console probably from over tightening on occasion. My mount holds solid off-roading. I just had velcro holding the laptop down. NO issues what so ever. Be careful not to place velcro under the battery, you might pull it loose on removal and break the tabs on the battery. Don't ask how I know.
 
Back
Top Bottom