CEL Light

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 18, 2013
Threads
16
Messages
51
I've had a weird issue with my 80 since I bought it 1 year ago.

It will occasionally not start but crank fine. Usually after 2-5 minutes of trying it will eventually start. However, last week on a camping trip, it would refuse to start at all.

If I leave it for between 3 days to 1 month without starting it, it will start right up on first go. If I drive it on day 1, on day 2 it will be hard to start, if start at all.

I notice on the hard to start days, the CEL is NOT lit during the ON position in the ignition. After a bit of research, people are suggesting the EFI relay. I've got a replacement on the way. In the mean time, is there any other issues which would cause the CEL to not be lit on the ON position in the ignition.

1992 AUS 1FZ 5sp manual FZJ80

Thanks in advance
 
Last edited:
CDL not lit indicates power loss to the ECU, not gona run. Check that circuit, connections, ECU relay, fusible link, etc. Don't know about the Australian market, is it the same as our OBD, '93-'94? If so, it's the yellow/red circuit, powers most of the EFI stuff.
 
CDL not lit indicates power loss to the ECU, not gona run. Check that circuit, connections, ECU relay, fusible link, etc. Don't know about the Australian market, is it the same as our OBD, '93-'94? If so, it's the yellow/red circuit, powers most of the EFI stuff.

He really means CEL (Check Engine Light), not the CDL (Center Differential Lock)
 
Back
Top Bottom