CEL code 12 & 72

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

retrofive

rɛtrəʊ
SILVER Star
Joined
Jan 6, 2008
Threads
302
Messages
15,323
Location
swfl
Yesterday my CEL came on. Paper'd clipped the diag port to pull the codes. As far as I can count the first code was a 12, and the second code was a 72. I took it down to an auto store to double check. Their scanguage only showed 1 code in memory of 12. Maybe limited by using ODBII tool on a ODBI system, not sure about that.

Found info on the 72 code, but coming up short on ideas on the 12 code?

Any thoughts?
 
The other thing it could be is that some codes clear themselves if you go (IIRC) 2 cycles without the issue occurring.

Not sure if the EGR system will do that, but I seem to recall that it will.

And wasn't that second code 71, not 72?



I still think you should clean the intake and throttle body. How about you and I do that Fri or Sat, since I need to do that too? :)
 
Your right was 71 NOT 72. Been staring at to many codes. And yes fri/sat lets clean.

After I pulled the code today from the autostore, I cleared the codes. Drove across town with no CEL, stopped, turned her off for a minute and then continued driving, about a mile later the CEL came back on. 2 cycles.... Haven't re-pulled them yet to verify it is the same code. Ill post up when i do that.
 
Back
Top Bottom