CDL won't dissengage

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 23, 2006
Threads
97
Messages
952
Location
NE Texas
I am in the process of wrapping up my diesel conversion on my 94 FZJ80. I bought the CDL switch and have it installed. The engine is not installed yet. I put in the switch, hooked up the battery and pushed the switch. I heard what sounded like a little motor going and something happening. The CDL light came on. When I pushed the button to disengage it wouldn't do anything? Any ideas? Does the car have to move a bit for it to disengage?
Rusty
 
That is what I am wondering, if it has to be driving to disengage? I heard it engage so I know it is working, or maybe I have it wired wrong and it engaged without the switch. I got some instructions and they said to ground the white/black wire on connector, not sure if this is right on not, seems like when I looked at the wiring it was grounded anyway. Anybody know?
Rusty
 
I just installed the switch....It took a short bit of driving before it would disengage, and my ABS lights went off.
 
...maybe I have it wired wrong and it engaged without the switch. I got some instructions and they said to ground the white/black wire on connector, not sure if this is right on not, seems like when I looked at the wiring it was grounded anyway. Anybody know?
Rusty

The factory switch is plug-and-play, no wiring necessary. What switch did you get? What wiring did you have to do?

-Spike
 
I was actually talking about the wiring instructions I got with the engine conversion. I removed most of the wiring and separated the the wires going to the transfer case, it said to ground the white/black wire or the CDL won't work. The CDL switch I got is the factory switch, just plug in and go. So when you turn the CDL off would there be a noise like a servo working similar to when you engage it, or does it just release when you move a couple feet? I guess I will find out in a couple weeks once it is finally moving again.
Rusty
 
My ABS light is on also, I forgot the CDL disables the ABS right? So again when I move a few feet they should both go off?
Rusty
 
Back
Top Bottom