CDL Not working

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 15, 2007
Threads
202
Messages
2,713
Location
North Bend, OR
Ok,

So just picked up an LX450 with lockers. Turn the switch and all I get is blinking lights. But I don't even hear the selenoids clicking. So I don't think it is a stuck issue. Did the turning in circles thing but to no avail.

Now there are many lights out on this truck so at first I figured it was just a light out but I believe when I put the truck in Low Range the CDL is not engaging which is stopping the lockers from engaging.

Now I could possibly do the CDL and 7-Pin mod but I would rather fix this first as it is stock.

Any idea on where to start on this one?
 
IIRC there is a switch somewhere on the transfer case that tells it to lock the cdl. I dont have a service manual so I cant really help you but it seems like a lot of these trucks never were put to use so some of the sensors and switches are gummed up. I would try putting it in a out a few times and see if it frees anything up.
 
Thank you,

I was thinking something along the same lines. Does anyone have a pic or procedure to check the switch to engage the CDL when the transfercase is switched into low? With the amount of miles and history of this car I doubt it was ever once put into low range.
 
Back
Top Bottom