CDL and rear diff lock ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 26, 2007
Threads
9
Messages
392
Location
Southwest WA
I've searched and read dozens of threads, but didn't find an answer to the following questions.

My CDL works, but it doesn't always disengage immediately. Sometimes I have to drive the vehicle in reverse for a few feet and then shift into park to get it to disengage. Is this common or does it sound like the actuator is a little sticky?

Also, when driving on payment with the CDL engaged and front diff open I get a clicking sound out of the steering knuckles when making a tight turn. Is this normal?

I know I was doing something I'm not supposed to do, but I was testing the rear. Besides puttting equal power to all 4 wheels I'm ignorant of what else locking the center diff would do.

As for the rear diff. It locks (confirmed on and off road), but the dash light still flashes. I should just need to replace the locker sensor, right?

What do you guys think?

Dorian
 
I confirmed the actuator was working last night. I could hear the actuator motor working when the engine was off. Today I put the transfer case in 4L, the center diff locked, and turned the diff lock knob to RR. The dash light never stopped blinking, but I believe the rear diff was actually locked because when weaving back and forth the rear wheels behaved like they were locked; one tire would drag, alternating side to side as I turned the wheel back and forth. The wheels did not do this when the cdl was engaged and the rrr/fr switch was in the unlocked position.
 
Back
Top Bottom