Cat Converter/O2 sensor help!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 19, 2017
Threads
1
Messages
3
Location
Lacey, WA
Hey folks, I'm in dire need of some assistance. I just got back from a 30 day field rotation to find out that my old lady took my 92 FJ80 to Midas to get the Check Engine Light diagnosed. Apparently, my O2 sensor is hanging out, and my cat converter took a dump on me. Now, I am completely new to the automotive world. Mind you, I've done some fair research, but the terminology is foreign to me. So, I gave it the "old college try" and took it to a muffler shop where the mechanic told me I needed TWO new cat converters, some O2 sensors, and that I needed to get all of my pipe work welded on(being that the Magnaflow Cats are universal) and that would cost me upwards of $900. He did add however, that if I bought my own stuff(cats, o2 sensors) that he could bring that atrocious $900 down to $400. If this is the best case, do I need:

-2 cats? Brands/links?
-2 02 sensors? Brands/links?

Am I being scammed? And whats the best bang for my buck? You guys are pros at this trial and error business, and I am definitely calling for a friend!
 
I'm far from an expert but if it's like my 96 then yes there are 2 of each. I had to replace the cats twice . First time I went cheap and it wasn't long before they failed. Having learned my lesson I upgraded the second time around and they've been fine for (I believe ) 3 years now. Can't recall the brand but I'll check paperwork later and let you know if you don't have it sorted by then .
 
Magnaflow on the cats and Denso on the sensors. There's lots of info on both on this site - including source info from members on this site. You'll see a lot of recommendations to first check the sensors - I did that based on reading the various threads on this site but alas had to replace the cc. Been 23k miles now without a problem. Don't recall/couldn't find what the previous set was (that failed in a few months) but learned my lesson going (what I thought was) low cost on the LC.
 
I really appreciate the help, fellas. Has anybody considered straight piping it, and cutting out the cat converter completely?
 
Can't really be done on a obd2 without o2 simulators but on obd1 it can be done. Some states require a cat for the car to be legal. Flow through glass packs look alot like high flow cats. I used one on my old Celica I had and the guy that did my inspection thought it was a cat.
 
I'm currently in Washington, and if the car is 25 years or older, you're safe from having to smog your vehicle. My buddy recommended straight piping it, and he said his ride is way smoother than it was before. Just wondering if this was possible. My 92 is an OBD1 I believe, so theoretically it should work right?
 
Yes you have a obd1 and only one cat and one o2 sensor that is located before the cat
 
Back
Top Bottom