carb idle fixed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 3, 2006
Threads
5
Messages
30
I am new to this board and first time owner of 73 fj40 with a 78 2f motor. Picked it up a week ago and began reading your awesome site and I just have to thank all of you with your expert advise. I did a search on poor idle and found my problem to be a combination of exhuast leak and even though I installed a new carb , I failed to properlly ground the idle solenoid. Once I took care of the ground and checked for the clicking sound I knew she was ready to go. I will be on this site every night and happy to be on board.
Leroy
 
Leroy,
Welcome to the board...or is it the madness :D

When you say the solenoid ground, are you referring to the single solenoid wire?
I believe this wire get's (+) voltage, not ground.

manny
 
re solenoid

the new carb I put in had a socket to hook up both the positve lead from the igniton and the other was the ground. I tested it by hooking it up direct to 12 volts and heard the click or solenoid engage. Leroy
 
didn't realize Toyota had solenoids w/two leads...thanks for the education.

post a pic of your rig, everyones waiting :D
 
Back
Top Bottom