Took my first trip of any distance with the HDJ81 this weekend. Found a nice lake and had beautiful weather. There were a convoy of hardcore trucks ranging from a toy truggy ,an eb on 44s and a crew cab diesel ford on boggers (thanks for the tug!). It was fun for me to see all the trucks and the alchohol fueled midnight chaos in the mud hole , don't think I will take the family camping on long weekends anymore though as the noise kept my wife and the others up at night. The pics at night didn't turn out well.
Impressions: I was vey impressed with how slow you can idle over obstacles (this is my first time with a diesel and an automatic), I will still change the ring and pinions to improve the freeway and street sluggishness though. Also impressed with the Goodyear MTRs as they worked very well even at 45 psi (too lazy to air down). I was able to get very good traction even without excessive wheel spin. I normally don't get into the mud but it was it seemed like the thing to do at the time. One thing that I wasn't impressed with was the high center of gravity and body roll. I think 4" slee springs are in my future. While my mystery 5.5"? springs from japan flex very well they suck on the freeway and did not feel very safe while braking,cornnering (spelling?) or even letting off on acceleration. I know my castor is still off spec, and this combined with the body roll makes for a white knuckle drive. I have castor plates installed and the 4" springs should eliminate any castor issues and have a better spring rate and eliminate body roll.
Impressions: I was vey impressed with how slow you can idle over obstacles (this is my first time with a diesel and an automatic), I will still change the ring and pinions to improve the freeway and street sluggishness though. Also impressed with the Goodyear MTRs as they worked very well even at 45 psi (too lazy to air down). I was able to get very good traction even without excessive wheel spin. I normally don't get into the mud but it was it seemed like the thing to do at the time. One thing that I wasn't impressed with was the high center of gravity and body roll. I think 4" slee springs are in my future. While my mystery 5.5"? springs from japan flex very well they suck on the freeway and did not feel very safe while braking,cornnering (spelling?) or even letting off on acceleration. I know my castor is still off spec, and this combined with the body roll makes for a white knuckle drive. I have castor plates installed and the 4" springs should eliminate any castor issues and have a better spring rate and eliminate body roll.