brakes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 31, 2005
Threads
1
Messages
3
'73 FJ40...
I've replaced the pads and shoes, bled the dickens out from each wheel with a presure bleeder from the wheels and tried the other way. The booster "appears" to be working. I get plenty of flow from the lines. There is plenty of vacuum (as much as can be expected). I'm no dumy, is there a special trick or stunt to know on these beasts?
WHY do I have to stand on the brake pedal to stop????

All answers welcome... I can take it..
-thanx-
 
heavy iron said:
'73 FJ40...
I've replaced the pads and shoes, bled the dickens out from each wheel with a presure bleeder from the wheels and tried the other way. The booster "appears" to be working. I get plenty of flow from the lines. There is plenty of vacuum (as much as can be expected). I'm no dumy, is there a special trick or stunt to know on these beasts?
WHY do I have to stand on the brake pedal to stop????

All answers welcome... I can take it..
-thanx-


Is your problem that you don't seem to generate enough pressure to adequately slow the vehicle down? Or is it that you run out of pedal (hit the floor) before developing adequate pressure?
 
Why do you assume your booster is working fine? Does it hold pressure? What happens when you hold the pedal and then turn off the engine? Did you soak your pads in oil before installing :) .If your system is stock, those drums should work pretty good without standing on them. classic leaking booster syndrome, verify it is really working before you drive for too long with a vac leak.
 
Not enough power to stop... does NOT go to the floor...

Why do I assume that the booster is good? ... because if I kill the engine and wait then step on the pedal the booster gasps... and I replaced the master cylinder. All wheel cylinders don't leak.
 
heavy iron said:
Not enough power to stop... does NOT go to the floor...

Why do I assume that the booster is good? ... because if I kill the engine and wait then step on the pedal the booster gasps... and I replaced the master cylinder. All wheel cylinders don't leak.

Don't assume the replacement master cylinder is good. My daughter needed two on her '76 FJ55 'cause the first replacement also leaked! Same symptoms, no external leak and poor braking performance.
 
did you replace with a stock mc or did you use a newer style 80 series mc? If you upgraded to a newer 80 series you may have to switch the lines, rear line to front port and vice versa. I had the exact symptoms you described.
 
Back
Top Bottom