brake & tranny specifications

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 26, 2004
Threads
116
Messages
1,282
Location
Oregon
Website
www.brian894x4.com
I know this is trival question, but I just spent 2 hours searching both the net and here and I just can't find this info anywhere.

I'm looking for the specifications of the front/rear brakes of a 1995 FZJ80. Such as rotor diameter, number of pistons, etc. The stuff you'd find in a magazine road test specifications, for example.

Also, does anyone know of a dealer brochure that is posted online or a detailed specification list of the '93-'97 FZJ80s. I've seen hundreds of very basic specifications, but I was looking for stuff like tranny gear ratios and other details and even the Slee and mud FAQs don't seem to have.

Thanks much. Sorry if I missed this info, but I honested looked for hours.
 
brakes are 4 piston front 1 piston rear,

not sure on rotor diameter, but i think the rears are larger OD than the fronts but with less working surface.
 
Gear Ratio

1st 2.804
2nd 1.531
3rd 1.000
4th 0.753 (Overdrive)
Reverse 2.393


Transfer

Gear Ratio
High Speed Range 1.000
Low Speed Range 2.488


Master Cylinder
Type, Tandem
Diameter mm (in.) 25.4 (1.00)
Booster Size in. 8” + 9”

Front Brake
Type Ventilated Disc
Pad Area cm2 (in.2) 50 (7.75) x 4
Wheel Cylinder Dia. mm (in.) 45.4 + 45.4 (1.79 + 1.79) x 4
Rotor Size (D x T)*1 mm (in.) 311.4 x 32 (12.26 x 1.26)

Rear Brake
Type Ventilated Disc
Pad Area cm2 (in.2) 37 (5.74) x 4
Wheel Cylinder Dia. mm (in.) 48.1 (1.89)
Rotor Size (D x T)*1 mm (in.) 335.0 x 18 (13.19 x 0.71)

Brake Control Valve
Type LSP & BV


Deflection Point of Hydraulic
Pressure*2 kPa (kgf/cm2, psi)
3432 (35, 498)
Pressure Reduction Gradient 0.25

Parking Brake
Type Drum
Size mm (in.) 230 (9.06)
Lever Type Center Lever

*1: D: Outer diameter, T: Thickness, *2:Unloaded condition

much of the the deeper info you are looking for can be found n the New Car Features manual that si where the above is from.

I find it interesting that they made the MC exactly 1", coincidence? or are Toyota engineers thinking in inches sometimes?
 
That's exactly what I was looking for. Thank you VERY much!

Just one quick question. Are the tranny gear ratios the same for the A440F and the A343F and if not, can you tell me which tranny those ratios are from and the ratios of the other tranny?

Thanks again! I'm trying to add some detailed information on my website.

Edit: Never mind. Found it in this thread!

https://forum.ih8mud.com/showthread.php?t=2249&highlight=A440F+gear+ratios
 
Back
Top Bottom