Brake system - help!??!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 7, 2005
Threads
12
Messages
38
Location
Saskatchewan, Canada
I have a 73 landcruiser and I'm installing a Dana 60 up front and a Corp 14 bolt in the rear. At the top end, I installed a 75 FJ40 master and I'm wanting to make sure I put this together correctly.

What are all components that need to be in this brake system? Can someone describe how to do that?
 
Ok thanks. Just wondering what components will be needed. Do I need to run a proportioning valve on the rear axle?

As I understand it...

Front brakes: Master flows to brass T which flows to calipers.
Rear brakes: master flows to proportioning valve, which flows to brass T, which flows to wheel cylinders.

Is that all? Just making sure I'm not missing anything so I only have to do this once. I've heard more than one opinion on where the prop valve goes.
 
Well I'm not running any big axles or anything but my brakes are set up like this.

https://forum.ih8mud.com/showpost.php?p=764059&postcount=16

It's one of those single line in/out knob adjustable pro valves rather than a stock one with a bunch of confusing lines going in and out of it. Keeps it simple.
 
Back
Top Bottom