Boring out hubs?

[canucksafari]

Anybody get a machine shop to bore out aloy wheel hubs? If so, how much did they charge per wheel. I got some stock 16" JDM LC alloys but the hub hole is a tad too small - about a 1/4 of an inch. I could probably do it with a router but would rather pay a machinist to do it if it isn't to pricey.

 

[baxter650]

Take them in to Helton Ind in Abby, at Perdonville and Perdonville across from the bingo hall, ask for Finn in the machine shop.

 

[canucksafari]

Take them in to Helton Ind in Abby, at Perdonville and Perdonville across from the bingo hall, ask for Finn in the machine shop.

Will do. Thanks for the info. How's life in Grandforks? I was through there two weeks ago but wanted to get back to Abby so did not stop in.

 

[baxter650]

I like it, the only precipitation comes in the form of snow, But i am told it's very appropriate for this time of year.
I am also told it may rain some in a month or so, and then have a few months of mostly sunshine.
They have things here the locals call seasons, and apparently, there's four of them per year!
I think I will stay and check it out for myself.

 

[kim]

4 seasons, eh?

Report back and let us know if it's true.