Blower Switch Wiring (Someone confirm)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 16, 2005
Threads
17
Messages
67
Location
Fresno, CA
Just want to make sure i understand what i'm doing since it's the last thing to wire then i'm done rewiring the cruiser. I'm using a 3 position switch on-off-on. I have three wires coming out of the motor. Switch power to center off terminal, Low speed blue and white wire to one terminal and high speed to the other on terminal light blue. Other wire coming off the motor is a ground wire i presume. If i got it right please let me know this is how i believe i should do it, but i'm not so confident.

Thanks in advance, i was getting tired of searching and coming up with a million taurus and electric fan install answers.
 
allright that diagram shows a wire going to ground so i think i'm good to go, i have about 13 FJ wire diagrams bookmarked on my computer unfortunatly that one wasn't one of them and the others almost made it look like it was grounded through the chassis.

Thanks for the response, should have heat tonight
 
well?

desertboy said:
allright that diagram shows a wire going to ground so i think i'm good to go, i have about 13 FJ wire diagrams bookmarked on my computer unfortunatly that one wasn't one of them and the others almost made it look like it was grounded through the chassis.

Thanks for the response, should have heat tonight
Did it work or did it fry?
 
Back
Top Bottom