BJ 45 engine up grade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 18, 2006
Threads
5
Messages
16
I posted this in the diesel tech section also.

Will be doing a rebuild on a BJ 45 troopie with a 2H motor.

A few things,
I don't want to come up with my own turbo sys. Will use kit only if doing an add on turbo.

I want Mech fuel injection sys. no electrical stuff where possable.

I'm looking at three options:

1. Rebuild the 2H with any up grades avalible, and put on an aftermarket turbo kit. Is there any thing I can do during overhaul to make it better for being turbo'ed?

2. Buy a "better" low mile engine from Japan. And add turbo kit to it. And intercooler. If this option which engine? (mech. fuel injection needed)

3. Buy a turboe'ed and intercooled low mile engine from Japan.
Again which engine. (mech. fuel injection)

Thanks for any advice, would like as many details as possable.

Allen
 
Hi All:

First off, if the rig has a 2H engine, that makes it a HJ45, not a BJ45.

Second, where are you at? Makes a big difference in availability of engines and parts.

Third, since you already have a diesel truck, I assume you desire an engine upgrade that is diesel as well? Or are you interested in gas (aka petrol) engine options?

Fourth, what use dies this *J45 get? Bush camping, long highway drives, heavy hauling, or what?

If the rig is indeed a BJ45 (with the 3B I-4 diesel) the natural upgrade would be a 13B-T from the Motherland (aka Japan.)

Good luck with the upgrade project!

Regards,

Alan
 
My mistake, it will be HJ45. Was later version called HJ47?

I'm in Washington State (Spanaway) for about 3 or 4 more weeks, then to Boise ID area.

Yes diesel upgrade. Thinking 1 of 3 options:

1.Overhaul 2H and add AXT turbo system.
2. Put a low mile 1HD-T engine,T-case & H55. Like from G&S
3. 1HZ engine,T-case & H55 and add Safari turbo kit.

Will be used for bush camping and carrying a pretty good load long driving on back roads.

Beginning to think after reading a lot of old posts. It might just be simpler to rebuild 2H & add AXT turbo and call it good.
If during rebuild anything can be up graded, like piston skirt cooling or any thing on the 12H do so.

I don’t know what kind of complications will be from the 1HZ &
1HD-T exhaust & intake being on opposite sides as the 2H.

Allen
 
Hi All:

Allen, if your make it up to Seattle give me a shout!

I'm not very knowledgeable about Toyota diesel engines; I do know that some will handle a turbo better than others. My memory says that the 2H is not one of them; I know the 1HZ is a great engine, but don't know about adding a turbo to one.

Our Aussie and Candian brethern can advise better in this area.

Good luck with the engine swap.

Regards,

Alan
 
Back
Top Bottom