BIRF REBILD PREP Q's

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 30, 2007
Threads
49
Messages
471
Location
KIRKSVILLE, MO
I am finally going to have to do the birfs, wheels, etc.! :crybaby:

Our LX450 is a DD w/o any offroad time but 180K on the clock.

I think the PS wheel bearing is going out (replaced the front bearings w/o FSM about 3 yrs & 40K ago). I have concluded this since there is an audible squeeking from that side and it dosen't seem to be the brakes since it is constant and doesn't fade or increase with brake pedal pressure.

I have looked over this site and found several postings on the birf rebuild which I'll print off and use as guidelines. Thanks for those who have gone before me! :D

There is a mention of the holy grail "birf DVD" and recommended FSM - neither do I have. Would anyone be willing to loan thier's or recommend (with $) where to get these items?

I would also like to know how to contact "cruiser dan" and or get an estimate on what parts will cost. I am mechanically inclined & have most tools for this project - but since I live in NE Missouri in a small town I want to have EVERYTING I need so once I get started I can get finished....we do have an O'reilly's and Autozone but I don't want to depend on them stocking 'cruiser parts!

Any help or recommendations are appreciated! Thanks!
 
FSM

CruiserDan does not stock the FSM, but he can give you the # for the Toyota parts distributor in CA that stocks the book. It's a little under $100, with shipping.

CruiserDan can build you the exact parts kit you need - he knows all the peices - saves you the homework and you'll know you didn't overlook anything.
 
El Mariachi is the maker for birf DVD...you can get by without it if you read the FAQs a couple of times...But worth investing the $10 for the visual tips which the DVD provides...
 
Back
Top Bottom