Big Brake Kit

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 27, 2006
Threads
74
Messages
191
I have not been watching the bulletin board for a while so i may have missed something.

But i was wondering if someone has ever put together a reasonable priced big brake kit for the 80.

Cross drilled, slotted, 100 pads, they seem like band aid fixes! I own a 2004 GMC Yukon with 140k and it finally needs its first brake job.

One of the few design issues that mar un otherwise solid vehicle.

Can we fit late model Tundra/Sequoia rotors and calipers?
GM, Ford?

Someone help me/us..
 
It does come up from time to time. The aftermarket kit prices have been brutally expensive--like $2500 or more.

Personally I'd love to see a big brake kit released in the US for reasonable dollars.
 
I think 100 series pads and reasonable driving could easily yield 50K miles. I know CDan gets a lot of miles from his 100 series pads. It's no 140K, but better than the 80 pads.

However, if you primary use of an 80 is towing, or your rig is really heavy, then I could see a big brake kit being necessary.

I don't think you could fit late model toy brakes since they have a different axle setup.
 
Yeah, our brakes suck. I take that into consideration when driving my pig.

I hate to say it, but my other big heavy pig (F-250 SD) stops a million times harder/faster/better than the 80 ever thought of doing. First time I stepped on the brakes in the Ferd I just about threw my passenger through the windshield.
 
Thanks to a PO buying cheap (crappy) aftermarket brake pads, I got to redo my entire rear brakes (new rotors, new calipers, new pads, etc).

I was AMAZED at the difference in stopping ability before and after. Before the brakes were mushy, didn't stop particularly well, etc. Afterwards the truck darn near stops on a dime (stops better than my dad's F-150 for example).

We regularly tow a 3k lb boat, and climb some pretty steep hills (including one that's about a 3,000 ft change in elevation in less than 10 miles :eek: ). I've never had brake fade or trouble stopping in the :princess: truck since I replaced the rears, and I still have the 80's pads on the front (planning on rebuilding the front calipers and moving to 100 series pads when I do my front end service).

Now my truck is a whole different story. I need to go through and rebuild the calipers, replace pads, change the brake fluid, and fine tune the LSPV in it. I can stop fairly decently, but not what I'd call good.

As a simple comparison, I nearly give myself whiplash every time I drive her truck (which isn't that often), because on the first stop I use the same amount of pressure on the brakes as what's required on mine. :whoops:
 
Thanks to a PO buying cheap (crappy) aftermarket brake pads, I got to redo my entire rear brakes (new rotors, new calipers, new pads, etc).

I was AMAZED at the difference in stopping ability before and after. Before the brakes were mushy, didn't stop particularly well, etc. Afterwards the truck darn near stops on a dime (stops better than my dad's F-150 for example).

We regularly tow a 3k lb boat, and climb some pretty steep hills (including one that's about a 3,000 ft change in elevation in less than 10 miles :eek: ). I've never had brake fade or trouble stopping in the :princess: truck since I replaced the rears, and I still have the 80's pads on the front (planning on rebuilding the front calipers and moving to 100 series pads when I do my front end service).

Now my truck is a whole different story. I need to go through and rebuild the calipers, replace pads, change the brake fluid, and fine tune the LSPV in it. I can stop fairly decently, but not what I'd call good.

As a simple comparison, I nearly give myself whiplash every time I drive her truck (which isn't that often), because on the first stop I use the same amount of pressure on the brakes as what's required on mine. :whoops:

My mother in law almost threw a passenger into the windshield after I installed 100 series pads. She had been used to driving suburbans, tahoes and such. My LX goes through a lot fewer pads than my moms suburban too. BUt a lot of that could be contributed to driving style and increased weight of a burban. I don't have bumpers or any added weight, so I am sure that helps a lot.

If you are having troubles with brake performance you might want to check your LSPV (especially if you have a lift), a good thorough brake line flush, nice OEM rotors, and high quality OEM pads. I have had a couple mechanics tell me how well Toyota pads wear/perform.
 
Back
Top Bottom