best motor swap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 25, 2004
Threads
30
Messages
130
i know all of you are going to say 350. but i would like to stay away from the 350r for some reason, would it be possible to use a 4.3 vortech? whats a good website to buy motor swap parts for the cruiser? motor mounts, tranny bell housings, etc...
 
there isnt a best engine for a swap, its all about your preference.

minipig, why bother with that engine, for less money and time spent swapping and fabbing parts you can have that kind of power easy from the 2F.
 
do a search on 4.3 swap, it has been done and is well documented on here with lots of pics and info. i dont remember if it was Texican or Poser but it was a very nice install.
 
RHINO said:
there isnt a best engine for a swap, its all about your preference.

minipig, why bother with that engine, for less money and time spent swapping and fabbing parts you can have that kind of power easy from the 2F.



Reliably?


I doubt it very much....


Even 250 out of a carbed 2F?



Show me a dyno slip and a build sheet PLEASE! :)



4.3 has been done in many a vehicle. If you do not find enough info here, hit up PPB, and do a search out there too.


:beer:
 
heck yeah reliable, how about 650 HP and mid 7's on the 1/4 mile, and that was in the seventies.

i am building a new engine now, about 275hp, plenty of oomph, dont have a build sheet, but i have alot of trial by error type stuff and build parameters. i can and will dyno this engine for ya.
 
Last edited:
good for you.


please post up your dyno numbers when you are done, and the pieces used in your build.



thanks.


nice edit btw...
 
well thats just it, not a whole lotta fancy pieces, just alot of machine work, mostly on the head. i think thats where alot of guys give up, most are willing to bolt on parts but few get into the required machine work outside of overbore and maybe decking for compression.
 
RHINO said:
there isnt a best engine for a swap, its all about your preference.

minipig, why bother with that engine, for less money and time spent swapping and fabbing parts you can have that kind of power easy from the 2F.

I prefer an I6 over a V8. Nothing wrong with V8's its just my own preference when it comes to placing an engine in a cruiser that isnt a TLC engine. The I-6 will last longer and be more reliable. People can use the arguement that GM parts are so easy to get if something breaks.... Out of all the Land Cruisers I have owned and driven the miles alone would have graved a Chevy V8 long before I ever needed a part that would have bankrupted me. True some I6's arent great... but the majority of them are and have awesome longevity. I would much rather stay with my slow low powered 2F or a 3B AXT.

I really wasnt saying the best engine for the money would be the GM 4.2 I-6 I listed above... but being if I had the money and couldnt use a Toyota engine then I would like to try the one I listed as it is an I6 and if true to most GM I-6's I have personal experience with or my family or friends have owned, and used in farm trucks and equipment... they last a very very long time. My last F engine made it almost to 400,000 Us miles before I decided to do an engine swap... then I used an 1987 2F. For me a Cruiser is point A to point B thru what ever is thrown at me in this world. I trust Toyota's Land Cruisers with my family and the factory engine is more then enough for us.

So in truth I would stay with a 2F or maybe even go to the 2-FE. Im not interested in monster power when it comes to my TLC.
 
I'm sticking with the 3B and a turbo on the FJ45LV. It might be awkward to find parts in the states but not elsewhere (besides that I almost never need parts anyways). Here in Central America it's likely easier to get the 3B parts than a Chevy 350 part!! Not to mention that my 3B sucks back alot less fuel!!
 
Back
Top Bottom