Bedliner Results - Picture

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 26, 2006
Threads
102
Messages
1,310
Location
NOVA
Website
www.flickr.com
All -

I know I posted a bit ago about my labor intensive bedliner (Herculiner) application process; however, due to circumstances out of my control (weather and flying back to Hong Kong) I was unable to get a good shot of the truck. So, here is a shot of the truck (compliments of the in-laws) with all the parts back on and the Herculiner completed. If you would like to see details of the application - check out my ROTW. As a reminder I did three layers and I used three tape lines - removing one line after each coat. This gave me the extremly defined lines albeit with a few more man hours than most probably would/could stand. Anyway, I have been happy with the Herculiner and despite the fact that 32 miles have been put on the truck since the application in October; I think it will hold up well.



Cheers.

- Mark
FJFAR80 FZJ80.webp
 
Looks professional. Good job :)
 
Thanks guys - I appreciate the comments. I think the three tape lines really allowed for that crisp and defined line. I also did a lot of heavy sanding basically taking all of the paint off to ensure that the Herculiner had a good surface to adhere to. Cheers.
 
Ahhh...good question...I used an adhesive caulk. I can't remember the exact brand but, it was some sort of heavy duty adhesive silicone type caulk. I applied this a few days prior, let it dry and then sanded everything including the door moldings. I figured with the moldings on it would give it a little bit more of a profile...and I liked the look.
 
Looks real nice. Awesome job.

Been looking to do the bedliner for awhile. Took off the flares sometime ago and have been going back and forth about which way I'm gonna go. Herculiner, Durabac or proffesional. This just makes me want to do it myself.
 
Congrats on a great job! Looks pro to me.
 
Cruiser Tom -

It is all about the prep - seriously, if you do a little extra on the front you will be fine. Just remember the key is to make sure that you take all the parts off (headlights, grills, blinkers, etc.) and then take your time preparing the surface. I used a random orbital sander (DeWalt) and 40 grit to really take off the paint and scratch up the panels. I figured if the Herculiner adhered directly to the panels the better the longterm wear would be. So, I am hoping longterm it will stand up to the wear.

Cheers.

- Mark
 
Back
Top Bottom