BDS Suspension Kits

[Overlord]

I haven't decided yet but I either want 35x12.5 BFG's or the 34x10.5 LTB's. Depends what the SOA gains me. If i go 35x12.5 what backspacing should I use on a 15x10 rim?

3.5" would be fine, but 2.5" would give you a wider stance. I would go with a 8" rim with the 12.5", especially with the 10.5 LTB's.

 

[JLight]

3.5" would be fine, but 2.5" would give you a wider stance. I would go with a 8" rim with the 12.5", especially with the 10.5 LTB's.

Sounds good to me. 8" rims are cheaper anyways. Thanks.

 

[89s rule]

I know this is an old post but i have a queation.

I have found a set of 15x10 rims but the backspoacing is 2.5" Will I be OK running 35x12.5's? I am looking into lifts now so if it will only work with certain lifts help with that would be great as well.

Thanks!

 

[Doc]

You'll need a bunch of lift to be able to stuff those wheels. More than 4" I'd imagine.

 

[brownbear]

I have bds kit. not too bad. the ride is fine , compared to broken originals. my only problem is the rear rh side has shifted off the centering pins. i did my lift somewhere with out extra parts availible and my buffer on the rh side was in poor shape. so now i got a new one coming. so keep in mind if you are in heavy rust area some of those parts may be rotten. and also extened brake lines are really needed for the rear, otherwise you can't lower the axel to the springs.