DROOL!!! Mine wants to grow up to be like yours!
TK
TK
Back from paint (1 Viewer)
- Thread starter Cirbo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I love seeing all of these FJ40 build threads! Nice job!
I don't know. That garage looks way to clean to me. Something's not right here.
But a very nice truck.
But a very nice truck.
Damn...Nice job keepin up with the Jones's.
That looks delicious!
- Thread starter
- #27
When I started this whole thing, I thought I had a good tub. After disassembly, it was found that both quarters had been skinned, all the roll bar mounts were bondo, and the boxed panel behind the gas tank was toast.
The tub was a tough nut to crack. Many of the captive nuts didn't line up correctly. I ended up having to weld up most all of the seat mount holes and drill new ones. Now that it's all done, I see I have a problem with the body mounts. When I install the mounts from rear to front, the front most (base of the firewall) mounts end up about an inch above the chassis mounting points. I still scratching my head on this one, but the doors seemed to test-fit fine when mocking everything up.
The tub was a tough nut to crack. Many of the captive nuts didn't line up correctly. I ended up having to weld up most all of the seat mount holes and drill new ones. Now that it's all done, I see I have a problem with the body mounts. When I install the mounts from rear to front, the front most (base of the firewall) mounts end up about an inch above the chassis mounting points. I still scratching my head on this one, but the doors seemed to test-fit fine when mocking everything up.
So those are Walker Evans racing wheels mounted to the stock axles right? Friggin sweet. 
What a great looking project you have there.
