Axle Splatter Need Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 17, 2006
Threads
5
Messages
17
I have a '97 LX450 with 198,000 miles. Replaced the left front axle/birfield about one year ago. About 6 months after that some type of seal must have blown because I started having globs of moly grease splattering all over the floor every night. Took it back to the shop, they repaired it under "warranty" and, now two months later, the splatter of moly grease is back and coming out in large globs. I've lost confidence in this shop and turn to the experts here to gain some insight into just what is causing the massive grease mess from under the axle ball joint area? Thanks for any help!
 
Most likely your inner axle seal was either not replaced, damaged or installed incorrectly during the birfield service. Oil is seeping from your differential past that seal and diluting the grease in the knuckle housing, which then leaks out past the knuckle ball wiper seals. A good shop would have replaced that seal during the birfield service.
Look in the 80 series FAQ or search "front axle axle service" and you will find tons of detailed information about replacing birfields and that inner axle seal. Read up before confronting the shop again about what they did during the birfield replacement.
 
Back
Top Bottom