Axle Service/PM

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2004
Threads
126
Messages
2,989
Location
Reno, NV
So with gettng ready to turn over to 100k miles, I figured it was time to do the front axle service, rear axle service, fuel filter and some new shocks. Hope the pictures show up. :bounce:

Also put new front rotors and front brake pads. The rotors are Brembo's and the pads are 100 series from CDan. I kept the stock springs, but upgraded the shocks to Bilsteins.

I checked the PHH and saw no signs of bulging, cracking or leaking, so it will stay for a while longer.
Axle Repack 001.webp
Axle Repack 003.webp
Axle Repack 009.webp
 
Heres one of the wife cleaning parts and the finished product. I didn't take any of the fuel filter change, but I figured that wasn't that exciting.
Axle Repack 002.webp
Axle Repack 013.webp
Axle Repack 015.webp
 
Well anyone that wants to keep the stock springs and get rid of the sea sickness, I highly recommend the Bilsteins. The truck actually feels like it is connected to the axles now. Whereas before, it kind of felt like you were being held together with a slinky. The brakes feel way better.

Also at one time in this trucks history the bearings all the way around were serviced. It had Timkens on all of the wheel bearings. The front short side was actually worse off that the long side, which kind of shocked me. Both axle seals were in need of replacement, but the short side was definitely the worse of the two. The rear axle was in pretty good shape, but I feel better about having done them. So now it has new bearings and seals both front and rear.

I also serviced the drive shafts. Everything is running smooth. Just glad to be done and back on the road.
 
Is that dishwashing soap in the parts washer?:eek:
 
No it's this biodegradeable stuff that I picked up at Costco. It didn't foam until it went through the pump. It worked pretty good.
 
locrwln1 said:
Also at one time in this trucks history the bearings all the way around were serviced. It had Timkens on all of the wheel bearings.

Timken bearings were used by Toyota on the 97's; perhaps other years too.

-B-
 
Last edited:
Beowulf said:
Timken bearings were used by Toyota on the 97's; perhaps other years too.

-B-


IIRC, one may request Koyo wheel bearings. I know the trunions come as Koyos. I ask for Koyo's and if they are not available, I source them locally at a bearing specialist...Ironic that Timken is located 20 minutes west of me, but this bearing only shop only carries and swears by the quality of the Koyo's.

:cheers:
 
beno said:
IIRC, one may request Koyo wheel bearings.

Yes, but the way I understood it was the OP surmised there was prior wheel bearing work done because it had Timken wheel bearings. That is not an indicator as the factory used Timkens.

-B-
 
beno said:
this bearing only shop only carries and swears by the quality of the Koyo's.
Interesting. I asked my distributor about Timken vs Koyo (they sell both), they say Timken is generally considered the better. They sell a lot of bearings for the auto industry.
 
'Course your distributor is in what state-that-might-have-blind-allegience-to-domestic-automotive-stuff? Heh.

DougM
 
Excellent job and great pics.
Having recently done the shocks I also noticed how much longer the Bilsiens were. Did you do the steering dampener?

:beer:
 
jditom said:
Excellent job and great pics.
Having recently done the shocks I also noticed how much longer the Bilsiens were. Did you do the steering dampener?

:beer:

Not yet. It feels pretty good right now, so I may wait on that a little longer.

I had my wife drive it today to make sure I wasn't imagining the difference the Bilsteins made. She said it was night and day difference. Much better to drive.:)

Jack
 
As someone who is just starting to figure out what all I need to do to address the front and rear axles, I salute you for taking the time and effort to document your work. Very helpful!

It would be ideal to have someone nearby that has done this before, to help or to troubleshoot, but without this forum I wouldn't even be considering it.
 
Back
Top Bottom