Astro PS

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 25, 2004
Threads
40
Messages
401
Location
Beaverton, Oregon
Website
thatsjet.com
Okay, so I've already scrubbed the LCML and this site about this. The question I have is this: what are the installation difficulties in mounting on a 55 with stock 2F and headers? I don't plan to ever do a SBC on it and I don't want to give away my firstborn for a 60 gearbox so I was thinking Astro since I found one on eBay for $40 and they appear to be very easy to find and repair Mounts similar to scout/fj60. I've heard a tiny blip about motor mounts or shock towers in the way but couldn't find any pics.

Thoughts?

Reasons I'm thinking astro:
- Mounts inside instead of outside like normal saginaw
- eliminates the drag link required with stock/mini
- parts are quite readliy available
- mounting doesn't seem like it would be hard at all. A bit like fj60 box.

:cheers:
 
Having had done a Astro on my 40 and having to undo a poorly done saganaw install on my 55 I can say it won't work with a 350. With a 2F it might The box has to be far back in the engine compartment because the 55 axle is so much further back. When I mocked it up the pitman was sticking way out and the relay rod was at an extreme angle. I ended up going with a standard sag box (68 Impala) and my relay rod angles back. Not the best, but far preferrable to leading with my steering components. With a SOA I did not want to play games with the scout box and the spring clearance, nor are there a lot of scout boxes in the Chicago area. I was already missing the stock components needed to make a mini truck or 60 box fit.

It also might fit with a G series van box that reverse pivots like an Astro, but sits on the outside of the frame rail like a C/K truck box.
 
Back
Top Bottom