arb exhaust jack??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 2, 2008
Threads
14
Messages
51
need a new jack since the cruiser is now lifted and need a new jack. any experience with the exhaust jack (the balloon that fills from the exhaust pipe) or the high lift? live in snow country for about 6 months out the year, don't deal with sand too much, and just general trail driving. what's the best option?
 
it's got an ome 3" with bfg 295's....is this set up too big to make the exhaust jack effective?
 
If you put it under the axle it should work fine. Thats not what this other person was doing however...
 
They work great at um...filling the space between the slider and ground...

I needs a bigger one.

IMG_0747.jpg
 
I attempted to put it under the axle in the back and it was pushing the E brake cable something fierce...at about 70% inflated.

I backed off at that point because it was wrapping around the axle like a "U" instead of filling up like a cube. I didn't want to push it and and up snapping the cable or bending a bracket back there.

So for stupid high cruisers....they can't really be used on level ground to change a tire, but for the average cruisers on 33/35s, I'm sure they would work better since there's more to lift.

Other boards have said "well Cody, if you're stuck and need to lift over something - your slider will be closer to the ground - so it will work"

Yes, this is probably true...maybe get a tire lifted enough to toss some rocks in the hole....deflate/remove.....then drive over the added height from the rocks.
 
Back
Top Bottom