Wanted Anyone swap in a H55 and still have the spacer for the old t-case?

[lowtideride]

Location

United States

I went from an auto to an h42 and I need the spacer that goes in between the case and the tranny. It is the spacer that goes on the input shaft not the bolt on spacer that makes up for not having 5th gear. If anyone has one laying around please let me know...

thanks,
-Al

 

[lagwagon]

I have one from an '87 h42 if that will work.$30+ the ride

 

[lowtideride]

I think you are talking about an h-42 later tranny the one with the bolt on spacer to make up for not having 5th gear.

I am talking about a small spacer that is on the input shaft. Not a bolt on spacer.

So, it would go ..spacer,gear,spacer,gear,bearing,nut...all on the input shaft of the h42 earlier model 81-84 tranny..

Thanks for the offer anyway..

-Al

 

[FJ60Cam]

Don't knowif this is the right one or not. It came from the later 4spd with spacer. It is 3.25", maybe you could cut it down?

 

[lowtideride]

Nope, Its not the right one but thanks for taking a picture for me. I would cut that one down to size, but the later 4-speed with the bolt on spacer has a larger shaft where the spacer you shown me goes. So, its also the wrong diameter. But, thats more or less what I am after just a different size spacer from an earlier year.

thanks again for your troubles..