Anyone know the front pinion angle?

Joined
Sep 15, 2010
Messages
696
Location
Lutz, FL
Does anyone know what the front pinion angle should be off the top of their head? I am working on an 80 series drivetrain on an fj40.
thanks
 
Joined
Jan 15, 2010
Messages
439
Location
Moab, UT
When mine was stock, I measured it to know where to get it back to. If measuring on the Flange, 83 degrees. So I guess angled up 7 degrees.

The bottom of the plate where the radius arms attach slopes up towards the front at 6.5 degrees.
 

Users who are viewing this thread

Top Bottom